Edition de l'article

AP-STA mode

Les champs marqués * sont obligatoires !

Paramètres

* Contenu

Pour insérer un lien vers un article veuillez utiliser la balise link : [link=$a]$b[/link] où $a représente le titre de l'article (sans caractères spéciaux, tel qu'il apparaît dans l'adresse) et $b représente le nom du lien

- Couleur du texte
- Couleur du fond
- Taille du texte
  
  Choisir la taille du texte (px)
  
  Aperçu du texte
  
  Insérer
- Police d'écriture
  Andale Mono
  
  Arial
  
  Arial Black
  
  Book Antiqua
  
  Comic Sans MS
  
  Courier New
  
  Georgia
  
  Helvetica
  
  Impact
  
  Symbol
  
  Tahoma
  
  Terminal
  
  Times New Roman
  
  Trebuchet MS
  
  Verdana
  
  Webdings
  
  Wingdings
- Alignement
  Aligner à gauche Insérer
  
  Centrer Insérer
  
  Aligner à droite Insérer
  
  Justifier Insérer
- Positionnement
  Flottant à gauche Insérer
  
  Flottant à droite Insérer
  
  Indentation Insérer
  
  Exposant Insérer
  
  Indice Insérer
- Titrage
  
  Titre 1
  Insérer
  
  Titre 2
  Insérer
  
  Titre 3
  Insérer
  
  Titre 4
  Insérer
  
  Titre 5
  Insérer
- Liste
  
  Nombre de lignes
  
  Liste ordonnée
  Sélectionner
  
  Insérer
- Tableau
  
  Nombre de lignes
  
  Nombre de colonnes
  
  Entête
  Sélectionner
  
  Insérer le tableau
- Conteneur
  Paragraphe Insérer
  
  Bloc Insérer
  
  Conteneur personnalisable Choisir
  
  Bloc champs Choisir
  
  Abréviation Choisir
  Conteneur personnalisable
  
  Ces critères nécessitent la connaissance des langages HTML/CSS et les propriétés du thème utilisé.
  
  Identifiant
  
  Classes
  
  Style
  
  Insérer
  
  Bloc champs
  
  Titre du bloc champs
  
  Style
  
  Insérer
  
  Abréviation
  
  Abréviation
  
  Nom complet
  
  Insérer
- Citation
  
  Auteur de la citation
  
  Citation
  
  Insérer
- Contenu Caché
  Cacher le contenu et l'afficher au clic Insérer
  
  Cacher le contenu aux visiteurs Insérer
  
  Cacher la fin du contenu aux visiteurs Insérer
  
  Cacher le contenu aux membres Insérer
- Style
  
  Remarque Insérer
  
  Question Insérer
  
  Succès Insérer
  
  Avertissement Insérer
  
  Erreur Insérer
- Lien
  
  Adresse du lien
  
  Texte du lien
  
  Insérer
- Adresse email
  
  Adresse email
  
  Texte de la balise
  
  Insérer
- Lien wikipedia
  
  Mot
  
  Définir une langue dans le lien Sinon fr est ajouté automatiquement
  Sélectionner
  
  Langue
  
  Insérer
- Flux RSS
  
  Nom du module
  
  Catégorie
  
  Nombre d'éléments à afficher
  
  Insérer
- Ancre vers un endroit de la page
  
  Nom de l'ancre
  
  Ajouter le lien vers l'ancre
  Sélectionner
  
  Insérer
- Son
  
  Adresse du fichier audio
  
  Insérer
- Vidéo
  
  Adresse de la vidéo
  
  Hébergeur
  
  Largeur de la vidéo
  
  Hauteur de la vidéo
  
  Ajouter une vignette
  
  Insérer
- Ajouter une image avec un effet lightbox
  
  Adresse de l'image
  
  Largeur max de la vignette (px)
  
  Insérer
- Ajouter une image avec description
  
  Adresse de l'image
  
  Texte alternatif
  
  Description de l'image
  
  Largeur max de l'image (px)
  
  Insérer
- Smileys
- Emojis HTML
  
  D'autres emojis sur unicode-table.com ou w3c.com
  Smileys
  
  😀
  
  😉
  
  😁
  
  😆
  
  😅
  
  😂
  
  🤣
  
  😊
  
  🙂
  
  😄
  
  🙃
  
  😇
  
  😃
  
  😚
  
  🥰
  
  😙
  
  😍
  
  😗
  
  🥲
  
  😘
  
  🤩
  
  😋
  
  😛
  
  😜
  
  🤪
  
  😝
  
  🤑
  
  🤔
  
  🤭
  
  🤗
  
  🤫
  
  😐
  
  😶
  
  🤨
  
  😬
  
  😏
  
  😑
  
  😒
  
  🙄
  
  🤐
  
  🤥
  
  😌
  
  😔
  
  😪
  
  😴
  
  🤤
  
  🥶
  
  🤧
  
  😷
  
  🤯
  
  🥴
  
  😵
  
  🤒
  
  🥵
  
  🤮
  
  🤕
  
  🤢
  
  🥸
  
  🤠
  
  🥳
  
  🤓
  
  😎
  
  🧐
  
  😕
  
  😖
  
  😧
  
  🥺
  
  😫
  
  😱
  
  😞
  
  😯
  
  😮
  
  😭
  
  😟
  
  😓
  
  😩
  
  😢
  
  😲
  
  😨
  
  🥱
  
  😳
  
  🙁
  
  😥
  
  😣
  
  😦
  
  😰
  
  ☠
  
  😤
  
  😈
  
  😡
  
  💀
  
  👿
  
  🤬
  
  😠
  
  💩
  
  🤡
  
  🤖
  
  👽
  
  👾
  
  👻
  
  👺
  
  👹
  
  🙉
  
  🙊
  
  🙋
  
  🗨
  
  💭
  
  💬
  
  💢
  
  💥
  
  💣
  
  💯
  
  💨
  
  💦
  
  💫
  
  💤
  
  👀
  
  💪
  
  🧡
  
  🤎
  
  🤍
  
  🖤
  
  💚
  
  💙
  
  💜
  
  💛
  
  💋
  
  💔
  
  💘
  
  💖
  
  💝
  
  ✋
  
  👋
  
  🖖
  
  🖐
  
  🤙
  
  🤞
  
  🤟
  
  🤘
  
  👌
  
  🤌
  
  🤏
  
  👆
  
  👇
  
  👈
  
  👉
  
  🤛
  
  🤜
  
  👍
  
  ✊
  
  👊
  
  👎
  
  👐
  
  🤝
  
  👏
  
  🤲
  
  🙏
  
  🙌
- Icônes Font Awesome
  
  [fa=fa-style,fa-option]nom de l'icône (sans le "fa-")[/fa]
- Code
  
  Chemin vers un fichier
  
  Langage
  
  Afficher sur une seule ligne
  Sélectionner
  
  Insérer

-- Overview Experimental (Unsupported) --

This walkthrough describes an installation of RaspAP on the [url=https://www.raspberrypi.com/products/raspberry-pi-zero-w/]Raspberry Pi Zero W[/url] or [url=https://www.raspberrypi.com/products/raspberry-pi-zero-2-w/]Zero 2 W[/url] models. However, the same steps apply to any device with a chipset capable of supporting this mode.

A managed mode AP, variously known as [b]WiFi client AP mode[/b], a [b]micro-AP[/b] or simply [b]AP-STA[/b], [i]usually[/i] works with the Quick Installer if the steps below are followed carefully. This feature was added to RaspAP specifically to support Internet of Things (IoT) and embedded applications for the Pi Zero W, however it is equally useful for a broad range of projects.

Disclaimer

This mode is [i]completely unsupported[/i] and should be used for educational purposes only. If you need a reliable solution with an access point (AP) and wireless client (STA) on the same device, buy a second Wi-Fi adapter and follow [url=https://docs.raspap.com/faq/#interfaces]this FAQ[/url] instead.

[url=https://github.com/RaspAP/raspap-webgui/assets/229399/d9adadde-9e96-4281-9978-4150f03026f2][Image][/url]

Before proceeding with the installation, it's important to have a basic understanding of how AP-STA works.

-- What is AP-STA mode? --

Many wireless devices support [i]simultaneous[/i] operation as both an access point (AP) and as a wireless client/station (STA). This is sometimes called Wi-Fi AP/STA concurrency. In this configuration, it is possible to create a software AP acting as a [url=https://docs.raspap.com/repeater/]wireless repeater[/url] for an existing network, using a single wireless device. This capability is listed in the following section in the output of [code=text,0,1]iw list[/code]:

[code=text]$ iw list | grep -A 4 'valid interface'
valid interface combinations:
* #{ managed } <= 1, #{ P2P-device } <= 1, #{ P2P-client, P2P-GO } <= 1,
total <= 3, #channels <= 2
* #{ managed } <= 1, #{ AP } <= 1, #{ P2P-client } <= 1, #{ P2P-device } <= 1,
total <= 4, #channels <= 1[/code]

The second valid interface combination indicates that both a [code=text,0,1]managed[/code] and [code=text,0,1]AP[/code] configuration is possible. The constraint [code=text,0,1]#channels <= 1[/code] means that your software AP must operate on the same channel as your Wi-Fi client connection.

Note

If you have a second wireless adapter bound to [code=text,0,1]wlan1[/code] on a Pi Zero W (or other device), refer to [url=https://docs.raspap.com/faq/#interfaces]this FAQ[/url].

-- Use cases --

There are many scenarios in which AP-STA mode might be useful. These are some of the more popular ones:

[list=ordered][*]A device that connects to a wireless AP but needs an admin interface to configure the network and/or other services.[*]A hub for Internet of Things devices, while also creating a bridge between them and the internet.[*]A guest interface to your home wireless network.[/list]

Security is an important consideration with IoT and it can be beneficial to keep your devices on a separate network, for safety’s sake. No one wants a random internet user turning your lights on and off.

-- How does AP-STA work? --

In this configuration, we create a virtual network interface (here [code=text,0,1]uap0[/code]) and add it as the AP to the physical [code=text,0,1]wlan0[/code] device. This virtual interface is used by several of the services needed to operate a software access point. RaspAP manages these configurations in the background for you. Relevant sections are displayed below as examples.

[code=text,0,1]dhcpcd.conf[/code]:

[code=text]# RaspAP uap0 configuration
interface uap0
static ip_address=192.168.50.1/24
nohook wpa_supplicant[/code]

[code=text,0,1]hostapd.conf[/code]:

[code=text]# RaspAP wireless client AP mode
interface=uap0[/code]

[code=text,0,1]dnsmasq.conf[/code]:

[code=text]# RaspAP uap0 configuration
interface=lo,uap0               # Use interfaces lo and uap0
bind-interfaces                 # Bind to the interfaces
domain-needed                   # Don't forward short names
bogus-priv                      # Never forward addresses in the non-routed address spaces[/code]

On AP-STA startup and system reboots, RaspAP's service control script adds the virtual [code=text,0,1]uap0[/code] interface and brings it up, like so:

[code=text]iw dev wlan0 interface add uap0 type __ap
ifconfig uap0 up[/code]

After the virtual [code=text,0,1]uap0[/code] interface is added to the [code=text,0,1]wlan0[/code] physical device, we can then start up [code=text,0,1]hostapd[/code]. It is important that the virtual interface is brought up first, otherwise it will fail with the message "could not configure driver mode". We also need to be sure that the interface is not managed by [code=text,0,1]systemd-networkd[/code], so this service should be disabled. These steps are handled by the [url=https://docs.raspap.com/faq/#raspap-service]RaspAP daemon[/url].

With a basic understanding of AP-STA mode, we can proceed with the installation.

-- Installation --

[list=ordered][*]Begin by flashing an SD card with the latest release of [url=https://www.raspberrypi.com/software/operating-systems/]Raspberry Pi OS (32- or 64-bit) Lite[/url].[*]Prepare the SD card to connect to your WiFi network in headless mode [url=https://docs.raspap.com/faq/#headless]according to this FAQ[/url].[*]Enable [code=text,0,1]ssh[/code] access by creating an empty file called "ssh" (no extension) in the SD card's root.[*]Insert the SD card into the Pi Zero W and connect it to power. [b]Note:[/b] the standard power supply for the Raspberry Pi is 5.1V @ 2.5A. Other power sources may result in undervoltage or other issues. Do [i]not[/i] use the micro USB connection.[*]Connect to your Pi via ssh. [code=text,0,1]ssh pi@raspberrypi.local[/code] is typical.[*]Follow the [url=https://docs.raspap.com/#quick-start]project prerequisites[/url] exactly. Do [i]not[/i] skip any of these steps.[*]Invoke the [url=https://docs.raspap.com/quick/]Quick Installer[/url] as normal: [code=text,0,1]curl -sL https://install.raspap.com | bash[/code].[*]The installer automatically detects a Pi (or other device) without an active [code=text,0,1]eth0[/code] interface. In this case, you will [i]not[/i] be prompted to reboot your Pi.[*]Open the RaspAP admin interface in your browser, usually [code=text,0,1]http://raspberrypi.local[/code].[*]The status widget should indicate that hostapd is inactive. This is expected.[*]Confirm that the [b]Wireless Client[/b] dashboard widget displays an active connection.[*]Choose [b]Hotspot > Advanced[/b] and enable the [b]WiFi client AP mode[/b] option.[*]Optionally, enable [b]Logfile output[/b] as this is often helpful for troubleshooting.[*]Choose [b]Save settings[/b] and [b]Start hotspot[/b].[*]Wait a few moments and confirm that your AP has started.[/list]

[img]https://user-images.githubusercontent.com/229399/224536460-b4c3550f-7cbb-4b47-8230-fc7be74fd69c.png[/img]

Note

The [b]WiFi client AP mode[/b] option will be disabled, or "greyed out", until a wireless client is configured.

-- When to reboot? --

Rebooting [i]before[/i] configuring AP-STA mode is likely the main cause of problems for users with the Pi Zero W. The reason is the [url=https://docs.raspap.com/defaults/]default configuration[/url] is designed for a wired (ethernet) AP.

Once the Pi Zero W is configured in AP-STA mode, RaspAP will store several values in [code=text,0,1]/etc/raspap/hostapd.ini[/code]:

[code=text]LogEnable = 1
WifiAPEnable = 1
BridgedEnable = 0
WifiManaged = wlan0[/code]

These are used by RaspAP's [url=https://docs.raspap.com/faq/#raspap-service]systemd control service[/url] [code=text,0,1]raspapd[/code] to determine that a managed mode AP is enabled for the Pi and restore the connection after subsequent reboots.

-- Changing hostapd settings --

Changes to the hotspot configuration should be applied to the [code=text,0,1]wlan0[/code] physical device, not [code=text,0,1]uap0[/code] (a virtual interface). In other words, if you wish to change [code=text,0,1]hostapd[/code] settings, stop the hotspot, disable AP-STA, make your config changes on [code=text,0,1]wlan0[/code], re-enable AP-STA and finally restart hostapd. An explanation is available [url=https://github.com/RaspAP/raspap-webgui/issues/752#issuecomment-757448664]here[/url].

Prévisualisation

Nature de la modification (facultatif, 100 caractères max)

* Code de vérification

Combien font 4 + cinq ?

Valider

Titre 1

Titre 2

Titre 3

Titre 4

Titre 5

Smileys